|
Product Range
HCl Acid Inhibitor Sulfuric Acid Inhibitor (Rodine 130) Sulfamic Acid Inhibitor (Rodine 31A, Rodine 102) Hydrofluoric Acid Inhibitor (Rodine 51) Phosphoric Acid Inhibitor Citric Acid Inhibitor Acetic Acid Inhibitor, Formic Acid Inhibitor Sodium Bisulfate Corrosion Inhibitor Mono Ethylene Glycol Brine Corrosion Inhibitor Propylene Glycol Brine Corrosion Inhibitor Nitrite Based Glycol Brine Corrosion Inhibitor Calcium Chloride Brine Corrosion Inhibitor Methanol Brine Corrosion Inhibitor Engine Radiator Coolant Corrosion Inhibitor Cooling Tower Water Scale And Corrosion Inhibitor Cooling Water Zinc Phosphonate Corrosion Inhibitor Chiller Water Nitrite Based Corrosion Inhibitor Molybdate Phosphonate Corrosion Inhibitor Boiler Condensate Line Corrosion Inhibitor Boiler Water Ph Booster / Alkalinity Builder Boiler Catalyzed Oxygen Scavenger Hot Water Nitrite Based Corrosion Inhibitor Steel Pickling Corrosion Inhibitor Steel Pickling Corrosion Inhibitor For Sulfuric Acid Acid Pickling And Passivation Chemical Inhibited Propylene Glycol Bright Green Colored Inhibited Propylene Glycol Coil Cleaner Boiler Water Alkalinity Builder Poly Electrolyte Inhibited Sulfamic Acid Boiler Descalant Condenser Descalant Boiler Descalant Inhibited Ethylene Glycol
 |
Descalants or Descaling Agents are chemical compounds that effectively dissolves, disperse or purge the scales, rust and soil deposits from heat exchangers and pipelines by means of re-circulation method, fill and soak method or immersion method. A descalant is always designed by keeping in mind the type of deposit and metallurgy of the system. Proper Corrosion Inhibitors are added in descalants to avoid damage to system metals.
After acidic descaling of system, it is important to passivate and neutralize the system with proper Passivating Agents for avoiding chances of flash rusting after descaling.
In some cases Scale Softeners and mechanical means like brushing and scrubbing of tubes is also required for heavily fouled systems.
Descaling is a labor oriented job and requires system downtime. Hence, the use of alternatives such as Online Descalants and Antiscalants are getting popular.
|
|
Condenser Descalant
| CHEMTEX’S condenser descalant is a heavy duty liquid descaling agent for removing hard mineral scale deposits and metal oxide deposits from the condenser tubes.
The descaling compound has an inbuilt corrosion inhibitor for providing corrosion protection to the metal during descaling operation. In addition to this is a wetting agent for quick removal of scale deposits with deep penetration method.
It contains defoaming agent to suppress the heavy foam that is generated during the process of descaling.
It surpasses the performance of other offline descalants (such as Nalclean 8940 of Nalco).
Application :
Condensers, Cooling Water Heat Exchangers, Radiators, Gear Boxes, Injection Mouling Machines, Blow Mouling Machines, Housings, D.G.Sets etc.
Specification | Chemical Type | Blend of Acidic Chemical Compounds | | Form | Liquid | | Specific Gravity | Ranges from 1.1 – 1.3 depending upon product | | pH | <2.0 | | Solubility | Completely Soluble in Water | Dosage:
The amount of chemical required to perform depends on the type of system, amount of scale and CT operating conditions. The specific dosage rates and method will be specified by the CSL technical representative.
Major Benefits - Quick and efficient removal of scale deposits
- Corrosion Inhibited to avoid metal corrosion
- Good wetting characteristics for quicker action
- Cost Effective
|
|
© Chemtex Speciality Limited. All Rights Reserved (Terms of Use)
