|
Product Range
HCl Acid Inhibitor Sulfuric Acid Inhibitor (Rodine 130) Sulfamic Acid Inhibitor (Rodine 31A, Rodine 102) Hydrofluoric Acid Inhibitor (Rodine 51) Phosphoric Acid Inhibitor Citric Acid Inhibitor Acetic Acid Inhibitor, Formic Acid Inhibitor Sodium Bisulfate Corrosion Inhibitor Mono Ethylene Glycol Brine Corrosion Inhibitor Propylene Glycol Brine Corrosion Inhibitor Nitrite Based Glycol Brine Corrosion Inhibitor Calcium Chloride Brine Corrosion Inhibitor Methanol Brine Corrosion Inhibitor Engine Radiator Coolant Corrosion Inhibitor Cooling Tower Water Scale And Corrosion Inhibitor Cooling Water Zinc Phosphonate Corrosion Inhibitor Chiller Water Nitrite Based Corrosion Inhibitor Molybdate Phosphonate Corrosion Inhibitor Boiler Condensate Line Corrosion Inhibitor Boiler Water Ph Booster / Alkalinity Builder Boiler Catalyzed Oxygen Scavenger Hot Water Nitrite Based Corrosion Inhibitor Steel Pickling Corrosion Inhibitor Steel Pickling Corrosion Inhibitor For Sulfuric Acid Acid Pickling And Passivation Chemical Inhibited Propylene Glycol Bright Green Colored Inhibited Propylene Glycol Coil Cleaner Boiler Water Alkalinity Builder Poly Electrolyte Inhibited Sulfamic Acid Boiler Descalant Condenser Descalant Boiler Descalant Inhibited Ethylene Glycol
 |
Propylene Glycol Brine Corrosion Inhibitor |
|
Chemtex’s Propylene Glycol Corrosion Inhibitor is a specially formulated chemical additive designed to prevent corrosion in multi-ways. It treats the surfaces of the metal making them less susceptible to corrosion. It buffers the organic acids formed as a result of glycol oxidation. Inhibited glycol based heat transfer fluids provides corrosion protection without reducing system’s heat transfer efficiency.
It is very important to use inhibitor in glycol system to prevent degradation of glycol. Glycol in presence to heat and air degrades into five organic acids namely: Glycolic Acid, Glyoxalic Acid, Formic Acid, Carbonic Acid & Oxalic Acid. Metal acts as catalyst in un-inhibited glycol solution for the formation of these acids, which then chemically attacks and corrodes system.
Also available Pre Inhibited Propylene Glycol and normal Propylene Glycol.
|
|
Propylene Glycol Brine Corrosion Inhibitor
| Corrosion Inhibitor For Propylene Glycol Brine The CSL propylene glycol brine corrosion inhibitor is an expert chemical additive engineered with the aim of preventing all sorts of corrosions in multi-ways. Our formula treats the surfaces of the subject by reducing the levels of corrosions that happens to cause damage otherwise. | why does the color of propylene glycol turn red? | due to immense corrosion in system, the rust in the system metal makes the glycol turn red in color. At this point the glycol is fouled with iron contaminants which increase the glycol degradation rate. It is important to add corrosion inhibitor to the glycol system to avoid such degradation of glycol. |
| | application | propylene glycol brine system (pg) |
| | specification | chemical type | organic chemical compound | | form | liquid | | freezing point | supercools | | voc | nil | | solubility | completely soluble in glycol and water | | dosage | the amount of corrosion inhibitor to inhibit corrosion depends on the type of system, application, brine concentration and plant operating conditions. The specific dosage rates and method will be specified by the csl technical representative. |
| | major benefits | minimum metal loss due to corrosion excellent heat transferability and flow rate long and extended life of glycol brine without fouling avoids leaks in heat exchangers such as phes maintains the anti-freezing properties of propylene glycol brine does not form sludge, as in case of other mere ph buffers used in glycol |
| |
|
© Chemtex Speciality Limited. All Rights Reserved (Terms of Use)
